Specializing in R&D & Production in xPON & Optical Communication & CATV & Ethernet Networking
HANGZHOU DAYTAI NETWORK TECHNOLOGIES CO.,LTD.
DAYTAI-HANGZHOU-CHINA
Tel:
+86-571-8735 7725-Español
+86-571-8735 7726-English
+86-571-8735 7727-English
+86-571-8735 7728-English
Fax : +86-571-8735 7798
Mr.Amani
Skype:daytai-amani
Mobile:+86-137 7755 3827
WeChat:+86-180 7288 6827
E-mail:info@daytai.com
Web Site:WWW.DAYTAI.COM
1310nm 10km 10G SFP+ Optical Transceivers (DT-SFP+-1310-10G-10KM),To Be Used On a Series of Switches, Routers, Servers,
Network InterfaceCard Etc,Package:SFP+,Data Rate:10G,Wavelength:1310nm,Reach:10km,TX:DFB,RX:PIN,TX Power:-6~0.5dBm,
1310nm 10km 10G SFP+ Optical Transceivers (DT-SFP+-1310-10G-10KM),To Be Used On a Series of Switches, Routers, Servers,
Network InterfaceCard Etc,Package:SFP+,Data Rate:10G,Wavelength:1310nm,Reach:10km,TX:DFB,RX:PIN,TX Power:-6~0.5dBm,
RX Sensitivity:-14.4dBm,Compatible With the Brand:Cisco,Juniper,Brocade,Arista,Mellanox,HPE,Dell,Dell Force10,Huawei...Etc is Optional.
★Features
⊙Hot-pluggable
⊙RoHS Compliant
⊙Single +3.3V power supply
⊙Up to 9.95 Gbps to 10.5Gbps
⊙AC coupling of LVPECL signals
⊙Operating temperature range:
⊙Commercial: 0C~+70C
⊙Industry: -40C~+85C
⊙International Class1 laser safety certified
⊙Duplex LC receptacle optical interface compliant
⊙1310nm Uncooled DFB Laser and PIN photo detector
⊙DDMI function available with internally calibrated mode
⊙Up to 10km transmission distance over Single Mode Fiber(SMF) without CDR inside
Absolute Maximum Ratings | ||||
Parameter | Symbol | Min | Max | Unit |
Storage temperature | TS | -40 | 85 | C |
Power Supply Voltage | Vcc3 | -0.5 | +4 | V |
Relative Humidity | RH | 5 | 95 | % |
Electrical Characteristics | ||||||
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Transmitter differential input voltage | Vin,pp | 180 | 700 | mW |
| |
Receiver differential output Voltage | Vout,pp | 300 | 850 | mW | ||
Transmit Fault (TX_Fault) | Voh | 2.4 | Vcc+0.3 | V | LVTTL | |
Vol | -0.3 | 0.4 | V | LVTTL | ||
Transmit disable voltage | VIH | 2 | Vcc+0.3 | V | LVTTL | |
Transmit enable voltage | VIL | -0.3 | 0.8 | V | LVTTL | |
Loss of Signal (LOS) | Voh | 2.4 | Vcc+0.3 | V | LVTTL | |
Vol | -0.3 | 0.4 | V | LVTTL |