Specializing in R&D & Production in xPON & Optical Communication & CATV & Ethernet Networking
HANGZHOU DAYTAI NETWORK TECHNOLOGIES CO.,LTD.
DAYTAI-HANGZHOU-CHINA
Tel:
+86-571-8735 7725-Español
+86-571-8735 7726-English
+86-571-8735 7727-English
+86-571-8735 7728-English
Fax : +86-571-8735 7798
Mr.Amani
Skype:daytai-amani
Mobile:+86-137 7755 3827
WeChat:+86-180 7288 6827
E-mail:info@daytai.com
Web Site:WWW.DAYTAI.COM
1550/1490nm 80km 10G SFP+ Optical Transceivers (DT-SFP+-1550/1490-10G-80KM),To Be Used On a Series of Switches, Routers,
Servers, Network InterfaceCard Etc,Package:SFP+,Data Rate:10G,Wavelength: 1550/1490nm,Reach:80km,TX:EML,RX:APD,TX
1550/1490nm 80km 10G SFP+ Optical Transceivers (DT-SFP+-1550/1490-10G-80KM),To Be Used On a Series of Switches, Routers,
Servers, Network InterfaceCard Etc,Package:SFP+,Data Rate:10G,Wavelength: 1550/1490nm,Reach:80km,TX:EML,RX:APD,TX
Power:0~4dBm,RX Sensitivity:-23dBm,Compatible With the Brand:Cisco,Juniper,Brocade,Arista,Mellanox,HPE,Dell,Dell Force10,
Huawei...Etc is Optional.
★Features
⊙Compatible with RoHS
⊙Power dissipation<1.5W
⊙Single +3.3V power supply
⊙Hot-pluggable SFP+ footprint
⊙Operating case temperature:
⊙Standard:0 to +70°C
⊙Industrial: -40 to +85°C
⊙Up to 80km for SMF transmission
⊙Supports up to 11.1Gbps bit rates
⊙Compliant with single LC receptacle
⊙EEPROM with Serial ID Functionality
⊙2-wire interface with integrated Digital Diagnostic monitoring
⊙1490nm DFB laser and PIN receiver for DT-SFP+-1490/1550-10G-80KM
⊙1550nm DFB laser and PIN receiver for DT-SFP+-1550/1490-10G-80KM
Parameter | Symbol | Min | Max | Unit |
Supply Voltage | Vcc | -0.3 | 4 | V |
Storage Temperature | Ts | -40 | +85 | °C |
Operating Humidity | - | 5 | 95 | % |
Signal Input Voltage | Vcc-0.3 | Vcc+0.3 | V |
Parameter | Symbol | Min | Typical | Max | Unit | |
Operating Case Temperature | Standard | Tc | 0 | +70 | °C | |
Industrial | -40 | +85 | °C | |||
Power Supply Voltage | Vcc | 3. 135 | 3.30 | 3.465 | V | |
Power Supply Current | Icc | 550 | mA | |||
Data Rate | 9.95 | 10.3 | 11.1 | Gbps | ||
Fiber Length 9/ 125μm core SMF | - | 80 | - | km |
Parameter | Symbol | Min | Typic al | Max | Unit | Notes | |
Transmitter | |||||||
Centre Wavelength | λc | 1480 | 1490 | 1500 | nm | DT-SFP+-1490/1550-10G-80KM | |
1540 | 1550 | 1560 | nm | DT-SFP+-1550/1490-10G-80KM | |||
Spectral Width (-20dB) | Δλ | 0.3 | nm | ||||
Side-Mode Suppression Ratio | SMSR | 30 | - | dB |
| ||
Average Output Power |
Pout | 0 | 4 | dBm | DT-SFP+-1490/1550-10G-80KM | ||
0 | 4 | dBm | DT-SFP+-1550/1490-10G-80KM | ||||
Average Launch power of OFF transmitter | Poff | -30 | dBm | 1 | |||
Extinction Ratio | ER | 7.5 | dB | ||||
Data Input Swing Differential | VIN | 180 | 1200 | mV | 2 | ||
Input Differential Impedance | ZIN | 80 | 100 | 120 | Ω | ||
Transmitter Fault Output-High | VFaultH | 2.4 | Vcc | V | |||
Transmitter Fault Output-Low | VFaultL | -0.3 | 0.8 | V | |||
TX Disable | Disable | VDisH | 2 | Vcc+0.3 | V | ||
Enable | VDisL | -0.3 | 0.8 | V |
Previous:No more