PON Power Meter (DT-POPM-213AV),With 10mw VFL (Visual Fault Locator),Color Screen,Built-in Rechargeable Battery,It can

simultaneously measure:1310/1490/1550NM,Measurement Rang:-40~+20dBm,Test Port Optical Connector:Suitable for:SC/FC/

ST APC OR UPC is Optional,Rechargeable Battery  Type:Li-ion lithium battery,3.7V-2000mAH,Nominal Voltage:3.7V,Nominal 

Capacity:2000mAH.Weight:425g,Charging Power Plug:European standard Plug or American standard Plug is Optional.

★Features

⊙Optional Chinese/English display.

⊙Optical power meter and VFL with one port.

⊙Used in Burst mode measurement of 1310nm upstream.

⊙10 minutes Auto-off function can be activated or deactivated 

⊙Good key design,high sensitivity, greatly reducing the volume and weight of the tester.

⊙Different models corresponding to different function, according to own use to choose .

⊙Use the software connect with PC, setting the threshold, data transfer, and calibration the wavelength.

⊙Providing simultaneous measurement for all three wavelengths on the fiber (1490nm, 1550nm,1310nm). 

⊙It can experiment at Voice, data and video signal synchronous measurement and display on BPON/EPON/GPON.

⊙Offers up to 10 different threshold sets in total,Three status LEDs represent different optical signal conditions of Pass, Warn and Fail respectively.

⊙USB communication port enables data transfer to a PC.1000measurement items can be saved in DT-POPM-213NA PON power meter or computer for data review.